Skytech Remote Controls

User friendly remote controls for your hearth products.These remote control devises work flawlessly up to 50' from the appliance allowing you the flexibility to thermostatically operate your heater whether if it is in a great room with a loft or adding old world charm to your cabin without having to run more wires. These devises utilize batteries in both the transmitter portion as well as the receiver devise that is wired to the appliance. Good quality alkaline batteries typically last more than a demanding heating season, however, we recommend you replace them every fall to ensure their seamless operation. You can have several remote control devises throughout your home or business, dip switches allow you to specify which appliance to operate or you can have one device control several appliances. Come by one of our showrooms and see their ease of use and stylish design for yourself.

SKY-5301
All battery operated; Touch screen transmitter; Backlit LCD screen; Thermostatic control; Flame icon and low; battery indicator; 9-hour countdown timer; Child safety lock out

Download Installation Instructions

3301
All battery operated; 5-button Up/Mode/Down within the face, Timer/Set below the flip cover with velvet touch casing; LCD displays both room and thermostat set temp. in °F or °C; 9-hour countdown timer and 24-hour clock; Flame icon and low battery indicator; Swing temp. (adj. 1-3); All Skytech batteries and wall holder included; Receiver with snap-on wall plate and (18”) wires with connectors

Download Installation Instructions

TS/R-2
All battery operated; Wireless thermostat or manual; ON/Set/OFF operation, surface mount; Large LCD screen displays room and set temp. in °F and °C; All Skytech batteries included; Receiver with snap-on wall plate; and (18”) wires with connectors; Receivers will learn up to TWO additional Skytech ON/OFF transmitters.

We also stock the wired version of the wall thermostat TS-3 it does still have a watch battery to operate the digital t-stat function which is extremely accurate. The wired version requires 18 gauge 2 conductor wire with no more linear footage than 35’ because it operates with DC voltage powered by the pilot light. Longer runs may work initially, then as it is used and wear and tear occurs the voltage may weaken and cause problems in the future.

Download Installation Instructions

ACCESSORIES

RS-1
Copolymer Tepcon material; High temperature material, 230°F

This accessory is primarily used for shielding excessive heat from activating a safety shut down feature on the remote control receiver and disabling the appliance. If you here a constant ”beeping” on a Sky Tech product there is too much heat on the receiver and the safety feature has been tripped. We use the RS-1 with fireplace louvered areas below the hearth.

Download Installation Instructions

RS-2
Log-style cover for battery receiver; Solid refractory construction

This accessory is primarily used for shielding excessive heat from activating a safety shut down feature on the remote control receiver and disabling the appliance. If you here a constant ”beeping” on a Sky Tech product there is too much heat on the receiver and the safety feature has been tripped. We use the RS-2 with fireplace insert or gas log insert where the receiver maybe more exposed especially where heat is retained in a masonry fireplace with a installed glass door fascia.

Download Installation Instructions